Roof Front Vibrates on Trailer

Highdesert

New member
May 19, 2024
17
3
Southeast NM
Just brought it home few days ago. The front 3 or so inches of the roof was vibrating in the wind while I pulled it home, doesn’t look good 👎🏻 . Trailer is level . Any thoughts on this?
 

Attachments

  • 5A50F758-153F-436B-89FB-E5ED5C59E132.jpeg
    5A50F758-153F-436B-89FB-E5ED5C59E132.jpeg
    626.4 KB · Views: 104
Same here. Don’t love it but haven’t seemed to have had any issues from it either.
 
I am afraid mine will end up breaking off on our long trips from TX to CO. I think I am going to put a ratchet strap on mine from front to back and see if that helps
 
I had the same concerns.
I added a 1/8"x 3/4" x 26" long aluminum flat bar pop riveted to the underside of the leading edge to strengthen it.
This has helped quite a bit.
I have trailered my ADV2 from Yuma, AZ to Idaho, Utah and many other locations with no problems .
 
Here’s what I did, just drilled down through the roof into the sheet metal above the windshield. Made a couple bushings and ran a bolt thru it. Way solid now, just gotta paint bolts and washers.
 

Attachments

  • IMG_9130.jpeg
    IMG_9130.jpeg
    277.8 KB · Views: 89
  • IMG_9132.jpeg
    IMG_9132.jpeg
    361.8 KB · Views: 88
I am going to add your fix to give more support to my aluminum flat bar install as noted in my post above...

More great ideas and fixes from our DIY members..
 

Latest Discussions

Back
Top