Search results

We used 1” dynamat . $700 worth on whole machine . I lowered decibels by 10 . We have road in 40 to 90 temps . We normally have to back off ac temp with low fan speed or we start getting cold .

Look under my post there are pics of my xpedition 4 point harness .

I am not affiliated with Force Turbos. Any comment I might have is my own opinion. Every 4 wheeled machine I own is either turbo or supercharged. 100 miles on my Xpedition made me wonder if I really should keep it . We still have are 180 hp turbo Pro Xp . Adding the turbo and about $800 of...

Having a great time in South Dakota.

Nope 16’ would be my choice double axle . Loaded about 3200 lbs .

The rubber is the stop mechanism. Take your hook off if possible slide rubber off see if winch will move . When you put rubber back on keep your hook a few inches away for slack . Good luck .

Having an Adv 2 Northstar I sorta wish I had went with XP5 Northstar . A lot of things would have been easier. I added Force turbo and Gilomen clutch kit specifically for turbo . I spent $900 on noise control which dropped 10 decibels of noise . Shocks are questionable with stock springs. I will...

If you look under plastic housing that covers the alternator , compressor you will find a 5/8 hole in bottom . I put a plug in mine . I took exhaust hose off and put my original air intake hose on it so it makes a snorkel it did take some trimming .The hose was left over from turbo kit . The...

When I installed my turbo I was able to unbolt motor mounts and jack motor up . I had to drop oil pickup and then I could pull pan and replace sealant . There is no gasket . Polaris sealer was on back order I used Yamabond 4 . It was pretty simple .

We did go for a 25 mile ride on roads . We had to go up a 3% grade bridge . The speed kept climbing all the way up. Very happy with it except springs on shocks about collapsed after loading up . Still waiting on Sdi e click . Probably won’t see till end of year .

I believe it was around a $1200 add on that included radiator and pump .

I had rotopax fuel cans about 5 years ago . They kept splitting at seams . Called rotopax they told me don’t have them out in the direct sun . I through 4 of them in trash and purchased aluminum fuel cans . That was my experience.

Sound is about same as stock exhaust . It is a little deeper pitch .If you took stock muffler off you can see all the baffling they used . Normally turbo does reduce noise .Tune was done by Pandemic. It is spot on . Gilomen clutch kit spot on. Now it is what you hoped it would be when you first...

I don’t have more than 10 miles on it after turbo install .What I can tell you is as soon as you floor it rpm goes to 7900 an off you go . Top RPM 8100 . I hit 70 pretty fast . I just finished putting everything on an sound deadening. Very happy with it .