Search results

I checked as much wiring and connections as I could, to include WD plugs and still have the distorted screen. I'm going to try again, even though there's only so many things to try, but it does seem like it should be something simple that I'm not figuring out. Another trip to the dealer I DO...

Front is fine. Rear at first wouldn't come on then had a line across the screen and screen was black. Then it came back on after shutting off the machine a starting it up again, but the screen was red and very grainy. Already checked connections. Any suggestions? Front Rear

If it were me installing them... it would be BREAKING solution 😛

Oil pan leak fixed. Rear bumper replaced. New front driveshaft installed. Everything covered under warranty. So far so good on the rattle believed to be caused by the front driveshaft. Will know for sure tomorrow. Was already warned to expect the rattle to eventually come back. Maybe one...

My glass windshield leaked like sieve. I took it to the dealer and they moved some stuff around along with some added silicone and it's 99% sealed. It still leaked a little around the windshield wiper motor, but nothing like it was.

Thats the first thing I said when I had the bumper put on. The way its set up, any angle up or down will rub. I hope I don't find out if it will damage the rope cause it sure looks like it could.

Was told a new driveshaft was being sent.

Those with this kit, does your Hazard and Horn toggle switch light up on your dash?

I'm about to find out, I'll let you know. Dropped off last week. May call tomorrow for an update. Oil pan, front driveshaft (if that's what's causing the rattle) and paint pealing off rear bumper.

Smell it every time at half tank.

For those with the WD kits, does your hazard and horn rocker switch light up?

Checked yesterday and you're spot on with the RPMS's. Machines heading to the dealership tomorrow.... AGAIN.

With what I saved on repairs, I coulda bought another machine. Will be heading to dealer shortly for oil pan leak. The list just keeps growing. Was told most of the early models will eventually have to have the oil pan gasket replaced. I'm curious about the rattle. I started hearing a...

Curiosity has me on this one. Anyone ever use one...

Already mentioned my front differential replaced. Since then I had steering rack/eps replaced. Easy for me to say because, it ain't my money, but I'm going to say it anyway. Just do it!

No doubt if you find yourself in an "oh shit" moment, there's a good chance it won't end well. I often think about this issue and I really hope nobody gets seriously hurt or worse, because of the brakes on these machines. They recommend babying the brakes when new and they do get a little...

You got that right! I've been shopping around and its disturbing what some lights cost. I'd rather destroy a 2-300 dollar light bar then an $1800 one, but to each their own.

Anyone use them? https://opentrailusa.com/product/stealth-series-led-light-bars/321955

Thank you sir.

Exactly what I was looking for. Thanks Mike. Would you by any chance have a link to those exact post? Not sure if they come in different sizes, as most don't even say what size/length they are, and most likely if I randomly pick one it'll be the wrong one. Thanks again.

Has anyone been able to mount the posts through the battery compartment wall without using the bracket? Haven't purchased one yet to know if the battery compartment wall is too thick for the post. Thanks...

Any rubbing?

If your machine didn't come with it, call your dealer and tell them you want it. Yes, they install for free.

https://www.802offroad.com/online-store/802-Off-Road-Polaris-Xpedition-Seat-Risers-p591584983

Wish I lived near them. Talk about convenient!

Pros/Cons if any? Thanks...

Leak issues yes, cracks no. Dealership addressed 99% of leak issues.

I just can't get over the fact that I can't see shit when I use the AC! Blue skies and 90 degrees with wipers on... WTF! Rant over just had to get it off my chest. Carry on.

It's a beautiful thing. Thanks Steve.

With stock wheels and tires, what's the lowest tire pressure you run (or would run) on rocky terrain?

Disregard my last. That's way too many miles to still be as you described.

If your machine is new, they will get better.

Okay thanks. Figured it would be cutting it close.

XP Northstar, so far front diff replaced, steering rack initially worked on now being replaced, windshield addressed twice for leaking, first and second heat shield paint peeled, door seal replaced, new clutch kit installed (noise didn't really bother me I'm deaf anyway). Somehow I haven't...

Not bashing your question or your intentions, strictly a curiosity question. Why would you want to do that?

The more people complain and continuously chirp about the issue the better chance everyone has of getting it resolved. Sit back and do nothing then expect nothing. Way too much money to sit back and do nothing.

Driver wasn't so bad passenger was a pain. Best I can say is after removing bolts try lifting the front and pulling forward and at the same time wiggle up and down and side to side. The side to side is what seemed to break it free.

I was telling my buddy I was thinking about getting the Tusk Terrabytes in 32" and how many of the reviews say they run small. Coincidently he had a set so we measured them and they were somewhere around 30 1/4-30 1/2. Knowing this I wonder how much it would be rolling the dice going with...

I installed the bed rails and wasn't impressed with where they bolt into the bed. Yeah, it makes sense to use the existing holes however after putting a couple cargo boxes in the bed and strapping them down I could see the rails start to lift away from the bed. I have no doubts if I cranked on...

I used a horse mat from TSC.

Bumping this up.

PM sent

I know this has already been discussed more than once in other threads. My question is solely intended to obtain information on a possible issue that we as consumers deserve an answer to. Please feel free to add additional information pertaining to your personal experiences with this possible...

Learn something new everyday (y)

Comfort, Standard or Sport mode? By any chance were they different between yours and your bosses?

No, two different issues. One has nothing to do with the other.

Read a lot of complaints about the tether ripping. Did you experience this, do you even use it or need it?

Damn I choked when I saw the price of Polaris's, but didn't feel too bad about it after finding this one, https://thumperfab.com/products/tf200901-polaris-xpedition-phone-dash-mount?variant=47635343606034

ddeyoung, where'd you get the phone holder and how's it worked out for you? Want to get one, but don't want to deal with junk that keeps falling off the dash. Thanks. Disregard I just put 1 and 1 together. I'm a little slow.

Mine fixed itself. Did it for a little while then stopped. Maybe because I haven't been driving it much.

154

Update on seat risers. For what it's worth 802 OFF ROAD is a great company to deal with. The issue with receiving the incorrect seat riser was quickly and professionally resolved. I'll be keeping an eye on what they have to offer for the Xpedition.

Finally installed the seat RISER. (Notice, singular "RISER"?) Opened one pack, which I must say they were packaged very well, and installed on the driver side. Opened the second pack and it was the wrong riser. Not sure what it was made for, but it wasn't made for my machine. Sent an email...

The infamous "front end clunk" which it's been to the dealer twice to try and figure out. The first attempt they found a bolt backing out on the steering rack. That didn't fix it. Second attempt they replaced front diff. That didn't fix it either. Other than stupid little stuff like the...

Man it just gets better. Yes, I just started experiencing this a couple days after getting my machine back from having the front differential replaced. I first heard it when I engaged the four wheel drive as I was going through some mud. I headed for solid ground to confirm I was hearing what...

It starts out small, but never stays that way. Nit picky, yes. OCD, possibly.

Mine is. Must be the same guy that prepped the heat shields. Adhesive didn't stick in a couple places. Go figure.

Second heat shield did the same as first, which was replaced under warranty. I even annoy myself with my nit pickiness.