Front bumper led lighting

R

RicB

New member
Nov 5, 2023
15
4
Michigan
I've searched on here and got a few ideas, but I'm looking for front led lights to mount on a factory bumper. Do you have a picture of what you did or have seen done?
 
There is always the option for the Rigid driving lights from Polaris. They are a bit expensive, but they’re really good lights. Also, they’re mostly pre-wired in just needing the dash switch and a Y-harness. Those will come with the light set from Polaris, along with a metal mounting bracket for behind the plastics.

There are less expensive options from a dozen or more manufacturers that will work as well. I personally have used GG Lighting several times and they have good quality lights at reasonable prices, with lifetime warranty. While mine isn’t the stock bumper, it is the Polaris HD bumper which I put 2 GG Lighting GP10s in.
IMG_7761.jpeg

I just purchased the switch and Y-harness separately from Polaris so I could use the factory wiring.
 
12" Sylvania thin off road bar - busbar wire loom from OZ-usa.com, Total solution $100
3" fog lights - busbar wire loom from OZ-usa.com, Total solution $150
 

Attachments

  • Front.jpg
    Front.jpg
    1.1 MB · Views: 125
Lasfit 12” light bar , auxbeam 4” amber powered by an auxbean 6 gang switch panel. Not a big fan of tube clamps for the amber lights but they work until I weld tabs on…
 

Attachments

  • IMG_1170.png
    IMG_1170.png
    1.6 MB · Views: 147
For the front bumper I put on an 11.5 inch single row attached to the top of the front bumper for stability. I also added 2 dome lights inside, one over the back seat and one over the cargo area that are LED and work great. There are existing mounts under the headliner for the additional dome lights.
The 41 inch top bar and the bumper are more than adequate for night riding here in the desert. I have spent a lot of money and overkill on my jeeps that was just not needed.

20240801_113212.jpg
20240801_113212 - Copy.jpg
 
New Polaris Dude said:
For the front bumper I put on an 11.5 inch single row attached to the top of the front bumper for stability. I also added 2 dome lights inside, one over the back seat and one over the cargo area that are LED and work great. There are existing mounts under the headliner for the additional dome lights.
The 41 inch top bar and the bumper are more than adequate for night riding here in the desert. I have spent a lot of money and overkill on my jeeps that was just not needed.

View attachment 3379View attachment 3380
Click to expand...
So what are you using to attach the light to the bar? Did you use the factory wire provided? If so was the wire inside long enough to put the switch at the center switch area?
 
I used a ring attachment I got through the dealer (picture below) that clamps on the bar with studs to attach the light bar.

I used a Polaris wiring harness from the bus to the switch.
 

Attachments

  • rings.jpeg
    rings.jpeg
    838.6 KB · Views: 90
I did a similar installation but my single row light bar is operated by a remote switch so I can turn on both inside and outside of the cabin. After talking to my friend who drives off road racers he said to get the yellow lens lights which work best in the AZ dust, which I also added and they are fantastic.
 

Attachments

  • 20240429_130352.jpg
    20240429_130352.jpg
    445.4 KB · Views: 96
I did a blinker flood light combo, posted this on another thing but the interior is a flood light. I’m happy, it’s not overly bright but that’s what the 50 inch light bar is for!
 

Attachments

  • IMG_0116.mov
    6.2 MB
You must log in or register to reply here.

XPEDITION Forum Photos

Featured image Featured image Featured image Featured image Featured image

XPEDITION Forum Photos

Featured image Featured image Featured image Featured image Featured image

Top Reactions

Latest Discussions

Back
Top