f150harley
Member
Has anyone come across a functional boot solution for the center console Shifter to reduce draft and dirt?
Shifter Boot Alternatives - Air Leak, Cool air Winter, Hot air Summer, Dust in cabin
- Thread starter f150harley
- Start date
DallasO
Member
I found this in someone else comments. I have not put it on yet but it looks like it will work just fine. From Partzilla.
| 5418112 GROMMET-SHIFTER,SEALED (Polaris) $5.31 |
Last edited:
DallasO
Member
Take a look and what "dbeck18787" (search him), to see what I just did. It appears that he pulled the new boot through the shifter boot and tied it off. I did just that and I guess time will tell...
f150harley
Member
- Thread starter
- #4
thanks muchly, I'll look into it.
johndeerefarmer
Well-known member
This is mine and it works great. I stuck a piece of sound deadener material to a piece of Reflectix. Made it long enough that when you shift gears the hole stays covered. Poke a hole in it and slip it down over the gear shift. and pull it up tight against the console. Works great and with the dark side up you don't even notice it! Shiny side down of course to reflect the heat
Attachments
I purchased this boot from Amazon and it arrived today. It's going to fit perfect with double sided tape at the bottom. It will cover PRNLH to the right of the shifter but no big deal as it can be read from the dash. It'll be an easy install and should make a big difference in the air coming through that area into the cab.
Qiilu Universal Shifter Boot Car Gear Shift Boot Cover PU Leather Gear Shift Knob Gaiter Boot Dustproof Cover Replacement for Corolla Amazon.com
Qiilu Universal Shifter Boot Car Gear Shift Boot Cover PU Leather Gear Shift Knob Gaiter Boot Dustproof Cover Replacement for Corolla Amazon.com
Last edited by a moderator:
Try it now, I tried another way to get the link to stay
f150harley
Member
- Thread starter
- #8
Looks like a good alternative, thanks for posting, I need to check it out.
aviatorden
New member
f150harley
Member
- Thread starter
- #10
Aviaorden, looks pretty clean, like it. Do you happen to have the Amazon link Handy?
aviatorden
New member
Have you installed this boot yet? Curious if it works or not. Please post a pic if you have any. Thanks
f150harley
Member
- Thread starter
- #13
Link not clickable nor shown in standard http protocol format: After some digital sleuthing this maybe the link that you are referring to: YIUIY Universal Pu Leather Manual Automatic Gear Shift Knob Cover Shift Boot Shift Lever dust Cover with White Seams Amazon.com
Last edited:
f150harley
Member
- Thread starter
- #14
has anyone tried this Polaris part number on their X? Previous comments on this part number indicate that it is not an exact fit and may require modification. Polaris 5418112 - GROMMET-SHIFTER,SEALED [S57C4] | Partzilla.com
Last edited:
DallasO
Member
I have it. It is not an exact fit, but by pulling it through the original slot, then reinstalling the the original, it seals perfectly. I'm thinking I'll pull it back off and glue the booted one to the original one. It really does work very well. No cold air or dust.
The part number for the boot is...5418112 GROMMET-SHIFTER, and I got it from Partzilla for about $15.00 with shipping.
The part number for the boot is...5418112 GROMMET-SHIFTER, and I got it from Partzilla for about $15.00 with shipping.
DallasO
Member
There are two small Allen head screws, one on the very front and after you take the top off, there’s another one in this inside where you take the knob off
Thank you!
Fyi but they are star pattern not an Allen wrench … but got it done!!
Attachments
B B
Active member
Looks good Jimbo. I'm guessing since you installed from the top the leather is just pushed down in the slot or did you somehow secure it on the inside of the console?
XPEDITION Forum Photos
XPEDITION Forum Photos
Latest Discussions
-
-
-
-
Xpedition adv in Idaho canyon county area
- Started by axial510
- Replies: 2
-
