mike
Member
First service on adv. Had two rangers previously and was similar for the gear box’s. Getting to the oil filter was difficult. Tried from the passenger side and couldn't reach it like the video showed. Manual said to remove plastic belly pan witch I had to do anyway after dropping the wrench into the pan trying from the oil fill access. The filter was really screwed on tight. Finally got loose from the underside and replaced. I have ordered a filter wrench with a bolt head on the end so can remove from the oil fill access. With a swivel boxed in wrench should be able to easily get to it from the top next time. Had the regular Polaris wrench that used a 3/8 extension and swivel but couldn’t make work Most of the issue was how tight it was screwed on. There is also a grease fitting on the axle going to the front differential That needed to roll machine forward until it was pointing down in the underside access hole.